--- - description: 'Through the key project of short-term climate prediction in the national "Ninth Five-Year Plan" and its enhancement project, a global ocean-atmosphere coupled model with mediate resolution has been established in Beijing Climate Center, which is named as BCC_CM1.0.' description_attribution: http://forecast.bcccsm.ncc-cma.net/web/channel-26.htm href: https://data.globalchange.gov/model/bcc-cm1.yaml identifier: bcc-cm1 name: Beijing Climate Center Climate System Model project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/BCC-CM1.htm uri: /model/bcc-cm1 version: ~ website: http://forecast.bcccsm.ncc-cma.net/web/channel-26.htm - description: 'BenMAP-CE is a open-source computer program that calculates the number and economic value of air pollution-related deaths and illnesses. The software incorporates a database that includes many of the concentration-response relationships, population files, and health and economic data needed to quantify these impacts. ' description_attribution: http://www2.epa.gov/benmap href: https://data.globalchange.gov/model/benmap-ce.yaml identifier: benmap-ce name: 'Environmental Benefits Mapping and Analysis Program - Community Edition' project_identifier: ~ reference_url: http://www2.epa.gov/benmap uri: /model/benmap-ce version: ~ website: http://www2.epa.gov/benmap - description: "The Community Climate Model (CCM) was created by NCAR in 1983 as a freely available global atmosphere model for use by the wider climate research community. The formulation of the CCM has steadily improved over the past two decades, computers powerful enough to run the model have become relatively inexpensive and widely available, and usage of the model has become widespread in the university community, and at some national laboratories.\r\nThe Community Climate System Model (CCSM) is a coupled climate model for simulating the earth's climate system. Composed of four separate models simultaneously simulating the earth's atmosphere, ocean, land surface and sea-ice, and one central coupler component, the CCSM allows researchers to conduct fundamental research into the earth's past, present and future climate states." description_attribution: http://www.cesm.ucar.edu/about/ href: https://data.globalchange.gov/model/ccsm3.yaml identifier: ccsm3 name: 'Community Climate System Model, version 3.0 (CCSM3)' project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/CCSM3.htm uri: /model/ccsm3 version: ~ website: http://www.cesm.ucar.edu/models/ccsm3.0/ - description: "CESM is a fully-coupled, community, global climate model that provides state-of-the-art computer simulations of the Earth's past, present, and future climate states. CESM is sponsored by the National Science Foundation (NSF) and the U.S. Department of Energy (DOE). Administration of the CESM is maintained by the Climate and Global Dynamics Laboratory (CGD) at the National Center for Atmospheric Research (NCAR)." description_attribution: http://www2.cesm.ucar.edu/about href: https://data.globalchange.gov/model/cesm.yaml identifier: cesm name: Community Earth System Model project_identifier: ~ reference_url: http://www2.cesm.ucar.edu uri: /model/cesm version: ~ website: http://www2.cesm.ucar.edu - description: ~ description_attribution: ~ href: https://data.globalchange.gov/model/cgcm31_t47.yaml identifier: cgcm31_t47 name: 'Community Climate System Model, version 3.1 (CCSM3)' project_identifier: cmip3 reference_url: http://www.cccma.ec.gc.ca/ uri: /model/cgcm31_t47 version: ~ website: http://www.ec.gc.ca/ccmac-cccma/default.asp?lang=En&n=1299529F-1 - description: ~ description_attribution: ~ href: https://data.globalchange.gov/model/cgcm31_t63.yaml identifier: cgcm31_t63 name: 'Community Climate System Model, version 3.1 (CCSM3)' project_identifier: cmip3 reference_url: http://www.cccma.ec.gc.ca/ uri: /model/cgcm31_t63 version: ~ website: http://www.ec.gc.ca/ccmac-cccma/default.asp?lang=En&n=1299529F-1 - description: "The CNRM-CM3 global coupled system is the third version of the ocean-atmosphere model initially developed at CERFACS (Toulouse, France), then regularlarly updated at Center National Weather Research (CNRM, METEO-FRANCE, Toulouse).\n" description_attribution: "http://www.cnrm.meteo.fr/scenario2004/references_eng.html\n" href: https://data.globalchange.gov/model/cnrm-cm3.yaml identifier: cnrm-cm3 name: Centre National de Recherches Météorologiques Climate Model project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/CNRM-CM3.htm uri: /model/cnrm-cm3 version: ~ website: http://www.cnrm.meteo.fr/scenario2004/references_eng.html - description: ~ description_attribution: ~ href: https://data.globalchange.gov/model/csiro-mk3_0.yaml identifier: csiro-mk3_0 name: CSIRO Mark 3.0 project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/CSIRO-Mk3.0.htm uri: /model/csiro-mk3_0 version: ~ website: ~ - description: ~ description_attribution: ~ href: https://data.globalchange.gov/model/csiro-mk3_5.yaml identifier: csiro-mk3_5 name: CSIRO Mark 3.5 project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/CSIRO-Mk3.5.htm uri: /model/csiro-mk3_5 version: ~ website: ~ - description: "ECHAM5 is the 5th generation of the ECHAM general circulation model. Depending on the configuration the model resolves the atmosphere up to 10 hPa for tropospheric studies, or up to 0.01 hPa for middle atmosphere studies (often referred to as MAECHAM5).\n" description_attribution: http://www.mpimet.mpg.de/en/wissenschaft/modelle/echam/echam5.html href: https://data.globalchange.gov/model/echam5_mpi-om.yaml identifier: echam5_mpi-om name: "European Centre for Medium-Range Weather Forecasts, Hamburg Generation 5 / Max Planck Institute\n" project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/ECHAM5_MPI-OM.htm uri: /model/echam5_mpi-om version: ~ website: ~ - description: ~ description_attribution: ~ href: https://data.globalchange.gov/model/echo-g.yaml identifier: echo-g name: ECHO-G = ECHAM4 + HOPE-G project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/ECHO-G.htm uri: /model/echo-g version: ~ website: http://mad.zmaw.de/Models/Modelliste1_neu.html - description: "The development of LASG/IAP Earth System Model FGOALS aims to provide a powerful scientific tool to simulate the realistic climate, and the anthropogenic influence on climate change, to understand the role of biogeochemistry processes in the evolution of the earth climate system. Based on the climate system model FGOALS, both a dynamic global vegetation module (VEGAS) in land component and a biogeochemical tracer module in ocean component have been successfully coupled into FGOALS framework, so that the FGOALS has become an Earth System Model involved with a completed carbon cycle. FGOALS has been applied to many researches, including studying the forming and variation of climate and the associated dynamics, carbon cycle processes, seasonal and intra-seasonal prediction, et al. And this model is carrying out IPCC scenarios integrations to provide the scientific numerical results of anthropogenic impact on climate change.\n" description_attribution: "http://www.lasg.ac.cn/FGOALS/ArticleShow2.asp?BigClass=Models%20Documentation&ArticleID=4224\n" href: https://data.globalchange.gov/model/fgoals-g1_0.yaml identifier: fgoals-g1_0 name: 'Flexible Global Ocean–Atmosphere–Land System Model, gridpoint version 1.0' project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/FGOALS-g1.0.htm uri: /model/fgoals-g1_0 version: ~ website: ~ - description: "In 2004, a new family of GFDL climate models (the CM2.x family) was first used to conduct climate research. The GFDL CM2.x models have become the workhorse model for GFDL's climate research. They are being applied to topics focusing on decadal-to-centennial (deccen) time scale issues (including multi-century control experiments and climate change projections), as well as to seasonal-to-interannual (si) problems, such as El Niño research and experimental forecasts." description_attribution: http://nomads.gfdl.noaa.gov/nomads/forms/deccen/ href: https://data.globalchange.gov/model/gfdl-cm2_0.yaml identifier: gfdl-cm2_0 name: 'Geophysical Fluid Dynamics Laboratory Coupled Model, Version 2.0' project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/GFDL-cm2.htm uri: /model/gfdl-cm2_0 version: ~ website: http://nomads.gfdl.noaa.gov/CM2.X/references/ - description: "In 2004, a new family of GFDL climate models (the CM2.x family) was first used to conduct climate research. The GFDL CM2.x models have become the workhorse model for GFDL's climate research. They are being applied to topics focusing on decadal-to-centennial (deccen) time scale issues (including multi-century control experiments and climate change projections), as well as to seasonal-to-interannual (si) problems, such as El Nino research and experimental forecasts." description_attribution: http://nomads.gfdl.noaa.gov/nomads/forms/deccen/ href: https://data.globalchange.gov/model/gfdl-cm2_1.yaml identifier: gfdl-cm2_1 name: 'Geophysical Fluid Dynamics Laboratory Coupled Model, Version 2.1' project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/GFDL-cm2.htm uri: /model/gfdl-cm2_1 version: ~ website: http://nomads.gfdl.noaa.gov/CM2.X/references/ - description: "GISS Atmosphere-Ocean Model is a computer program that simulates the Earth's climate in three dimensions on a latitude-longitude grid. The Model requires two kinds of input, specified parameters and prognostic variables, and generates two kinds of output, climate diagnostics and prognostic variables. The specified input parameters include physical constants, the Earth's orbital parameters, the Earth's atmospheric constituents, the Earth's topography, the Earth's surface distribution of ocean, glacial ice, or vegetation, and many others. The time varying prognostic variables include fluid mass, horizontal velocity, heat, water vapor, salt, and subsurface mass and energy fields." description_attribution: http://aom.giss.nasa.gov/ href: https://data.globalchange.gov/model/giss-aom.yaml identifier: giss-aom name: Goddard Institute for Space Studies Atmosphere-Ocean Model project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/GISS-AOM.htm uri: /model/giss-aom version: ~ website: http:/aom.giss.nasa.gov - description: 'The current incarnation of the GISS series of coupled atmosphere-ocean models is now available. Called ModelE, it provides the ability to simulate many different configurations of Earth System Models - including interactive atmospheric chemistry, aerosols, carbon cycle and other tracers, as well as the standard atmosphere, ocean, sea ice and land surface components.' description_attribution: http://www.giss.nasa.gov/tools/modelE/ href: https://data.globalchange.gov/model/giss-eh.yaml identifier: giss-eh name: Goddard Institute for Space Studies ModelE-H project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/GISS-E.htm uri: /model/giss-eh version: ~ website: http://www.giss.nasa.gov/tools/modelE/ - description: 'The current incarnation of the GISS series of coupled atmosphere-ocean models is now available. Called ModelE, it provides the ability to simulate many different configurations of Earth System Models - including interactive atmospheric chemistry, aerosols, carbon cycle and other tracers, as well as the standard atmosphere, ocean, sea ice and land surface components.' description_attribution: http://www.giss.nasa.gov/tools/modelE/ href: https://data.globalchange.gov/model/giss-er.yaml identifier: giss-er name: Goddard Institute for Space Studies ModelE-R project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/GISS-E.htm uri: /model/giss-er version: ~ website: http://www.giss.nasa.gov/tools/modelE/ - description: 'HadCM2 was the first Met Office Hadley Centre coupled model developed under the Unified Modelling system. HadCM2 stands for the Hadley Centre Coupled Model version 2. It was developed in 1995 and used in the Second Assessment Report of the Intergovernmental Panel on Climate Change. The atmospheric component has 19 levels with a horizontal resolution of 2.5 degrees of latitude by 3.75 degrees of longitude, which produces a global grid of 96 x 73 grid cells. This is equivalent to a surface resolution of about 417 km x 278 km at the Equator, reducing to 295 km x 278 km at 45 degrees of latitude. The oceanic component has 20 levels with a horizontal resolution of 2.5 degrees of latitude by 3.75 degrees of longitude, exactly congruent to the atmosphere.' description_attribution: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm2 href: https://data.globalchange.gov/model/hadcm2.yaml identifier: hadcm2 name: Hadley Centre Coupled Model version 2 project_identifier: ~ reference_url: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm2 uri: /model/hadcm2 version: 2 website: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm2 - description: 'HadCM3 is a coupled climate model that has been used extensively for climate prediction, detection and attribution, and other climate sensitivity studies. HadCM3 stands for the Hadley Centre Coupled Model version 3. It was developed in 1999 and was the first unified model climate configuration not to require flux adjustments (artificial adjustments applied to climate model simulations to prevent them drifting into unrealistic climate states). HadCM3 was one of the major models used in the IPCC Third and Fourth Assessments, and also contributes to the Fifth Assessment. Its good simulation of current climate without using flux adjustments was a major advance at the time it was developed and it still ranks highly compared to other models in this respect [Reichler and Kim, 2008]. It also has the capability to capture the time-dependent fingerprint of historical climate change in response to natural and anthropogenic forcings [Stott et al. 2000] which has made it a particularly useful tool in studies concerning the detection and attribution of past climate changes. HadCM3 is also the climate configuration used in the following projects: UK Climate Projections ( UKCP09) the operational decadal forecasting system (DePreSys) until 2012 the regional modelling system PRECIS Climateprediction.net The atmospheric component has 19 levels with a horizontal resolution of 2.5 degrees of latitude by 3.75 degrees of longitude, which produces a global grid of 96 x 73 grid cells. This is equivalent to a surface resolution of about 417 km x 278 km at the Equator, reducing to 295 km x 278 km at 45 degrees of latitude. The oceanic component has 20 levels with a horizontal resolution of 1.25 x 1.25 degrees. At this resolution it is possible to represent important details in oceanic current structures.' description_attribution: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm3 href: https://data.globalchange.gov/model/hadcm3.yaml identifier: hadcm3 name: Hadley Centre Coupled Model version 3 project_identifier: ~ reference_url: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm3 uri: /model/hadcm3 version: 3 website: ~ - description: 'HadGEM1 is the first in a new generation of coupled climate models incorporating a non-hydrostatic, fully compressible, deep atmosphere formulation with a semi-implicit semi-Lagrangian time integration scheme. HadGEM1 stands for the Hadley Centre Global Environment Model version 1. It was developed in 2006 and used in the Fourth Assessment Report of the Intergovernmental Panel on Climate Change. The atmospheric component has 38 levels extending to ~40km height, with a horizontal resolution of 1.25 degrees of latitude by 1.875 degrees of longitude, which produces a global grid of 192 x 145 grid cells. This is equivalent to a surface resolution of about 208 km x 139 km at the Equator, reducing to 120 km x 139 km at 55 degrees of latitude. One of the main differences between this climate configuration and previous versions is the use of the New Dynamics core which is a non-hydrostatic, fully compressible, deep atmosphere formulation with a semi-implicit semi-Lagrangian time integration scheme. This dynamical core can be used over a wide range of temporal and spatial scales, from very high resolution convection-permitting scales (of order 1 km) to hundreds of kilometres in climate models run for centuries. The oceanic component utilizes a latitude-longitude grid with a longitudinal resolution of 1 degree, and latitudinal resolution of 1 degree between the poles and 30 degrees North/South, from which it increases smoothly to one third of a degree at the equator, giving 360 x 216 grid points in total, and 40 unevenly spaced levels in the vertical (a resolution of 10m near the surface).' description_attribution: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadgem1 href: https://data.globalchange.gov/model/hadgem1.yaml identifier: hadgem1 name: Hadley Centre Global Environment Model version 1 project_identifier: ~ reference_url: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadgem1 uri: /model/hadgem1 version: 1 website: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadgem1 - description: 'The HadGEM2 family of climate models represents the second generation of HadGEM configurations, with additional functionality including a well-resolved stratosphere and Earth System components. HadGEM2 stands for the Hadley Centre Global Environment Model version 2. The HadGEM2 family of models comprises a range of specific model configurations incorporating different levels of complexity but with a common physical framework. The HadGEM2 family includes a coupled atmosphere-ocean configuration, with or without a vertical extension in the atmosphere to include a well-resolved stratosphere, and an Earth-System configuration which includes dynamic vegetation, ocean biology and atmospheric chemistry. Members of the HadGEM2 family will be used in the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. The ENSEMBLES project also uses members of this model family. The standard atmospheric component has 38 levels extending to ~40km height, with a horizontal resolution of 1.25 degrees of latitude by 1.875 degrees of longitude, which produces a global grid of 192 x 145 grid cells. This is equivalent to a surface resolution of about 208 km x 139 km at the Equator, reducing to 120 km x 139 km at 55 degrees of latitude. A vertically-extended version, with 60 levels extending to 85km height, is also used for investigating stratospheric processes and their influence on global climate. The oceanic component utilizes a latitude-longitude grid with a longitudinal resolution of 1 degree, and latitudinal resolution of 1 degree between the poles and 30 degrees North/South, from which it increases smoothly to one third of a degree at the equator, giving 360 x 216 grid points in total, and 40 unevenly spaced levels in the vertical (a resolution of 10m near the surface).' description_attribution: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadgem2 href: https://data.globalchange.gov/model/hadgem2.yaml identifier: hadgem2 name: Hadley Centre Global Environment Model version 2 project_identifier: ~ reference_url: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadgem2 uri: /model/hadgem2 version: ~ website: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadgem2 - description: "The HadGEM3 family of climate models represents the third generation of HadGEM configurations and includes the NEMO ocean model and CICE sea-ice model components. HadGEM3 stands for the Hadley Centre Global Environment Model version 3. The HadGEM3 family of models comprises a range of specific model configurations incorporating different levels of complexity but with a common physical framework. The HadGEM3 family includes a coupled atmosphere-ocean configuration, with or without a vertical extension in the atmosphere to include a well-resolved stratosphere, and an Earth-System configuration which includes dynamic vegetation, ocean biology and atmospheric chemistry. One of the main changes in the HadGEM3 family of models compared with previous versions is the inclusion of the NEMO ocean modelling framework, which is also used in the Met Office's ocean forecasting system, and CICE, the Los Alamos sea ice model. These are coupled to the atmospheric model through the OASIS coupler developed at CERFACS in France. The HadGEM3 family of climate configurations is currently under development. The GloSea5 seasonal forecasting system uses a member of this model family. A range of atmospheric resolutions is available. There is a choice of vertical resolutions between 38 levels extending to ~40km height (of which 29 are below 18km), 63 levels extending to ~40km height (of which 50 are below 18km), and 85 levels extending to 85km in height (of which 50 are below 18km), the latter allowing improved representation of stratospheric processes. Horizontal resolutions vary between 2.5 degrees of latitude by 3.75 degrees of longitude and 0.556 degrees of latitude by 0.833 degrees of longitude, depending on the application. The ocean component uses the ORCA tripolar grid (Madec and Imbard, 1996) which is available at 2.0 degree, 1.0 degree and 0.25 degree horizontal resolutions, and vertical resolutions of 42 levels (a resolution of 5m near the surface), and 75 levels (a resolution of 1m near the surface)." description_attribution: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadgem3 href: https://data.globalchange.gov/model/hadgem3.yaml identifier: hadgem3 name: Hadley Centre Global Environment Model version 3 project_identifier: ~ reference_url: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadgem3 uri: /model/hadgem3 version: 3 website: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadgem3 - description: "The HYSPLIT model is a complete system for computing simple air parcel trajectories to complex dispersion and deposition simulations. The initial development was a result of a joint effort between NOAA and Australia's Bureau of Meteorology. Recent upgrades include enhancements provided by a number of different contributors. Some new features include improved advection algorithms, updated stability and dispersion equations, continued improvements to the graphical user interface, and the option to include modules for chemical transformations. Without the additional dispersion modules, Hysplit computes the advection of a single pollutant particle, or simply its trajectory. The dispersion of a pollutant is calculated by assuming either puff or particle dispersion. In the puff model, puffs expand until they exceed the size of the meteorological grid cell (either horizontally or vertically) and then split into several new puffs, each with it's share of the pollutant mass. In the particle model, a fixed number of particles are advected about the model domain by the mean wind field and spread by a turbulent component. The model's default configuration assumes a 3-dimensional particle distribution (horizontal and vertical)." description_attribution: http://www.arl.noaa.gov/HYSPLIT_info.php href: https://data.globalchange.gov/model/hysplit.yaml identifier: hysplit name: Hybrid Single-Particle Lagrangian Integrated Trajectory project_identifier: ~ reference_url: http://www.arl.noaa.gov/HYSPLIT_pubs.php uri: /model/hysplit version: ~ website: http://www.arl.noaa.gov/HYSPLIT_info.php - description: "INGV-SXG is an Atmosphere Ocean sea-ice General Circulation Model (AOGCM) developed at INGV with the aim of investigating the features and the mechanisms of the climate variability and change. This model was used to produce the INGV-CMCC Intergovernmental Panel on Climate Change (IPCC) scenario simulations. INGV-SXG is an evolution of SINTEX and SINTEX-F and this report indicates the improvement with respect to these previous INGV AOCM model: the new model includes a thermodynamic-dynamic sea-ice model and the capabilities to use external radiative forcings (Ozone, Sulfate Aerosols, Greenhouse Gases) as specified in the protocol for the IPCC standard experiments.\n" description_attribution: http://www.cmcc.it/publications/rp0015-ingv-sxg-a-coupled-atmosphere-ocean-sea-ice-general-circulation-climate-model href: https://data.globalchange.gov/model/ingv-sxg.yaml identifier: ingv-sxg name: Istituto Nazionale di Geofisica e Vulcanologia Scale Interactions Experiment-G project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/INGV-SXG.htm uri: /model/ingv-sxg version: ~ website: ~ - description: ~ description_attribution: ~ href: https://data.globalchange.gov/model/inm-cm3_0.yaml identifier: inm-cm3_0 name: Institute of Numerical Mathematics Climate Model Version 3.0 project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/INM_CM3.0.htm uri: /model/inm-cm3_0 version: ~ website: ~ - description: "The IPSL-CM4 model (Marti et al. 2010) couples four components of the Earth system: LMDZ-4 (Hourdin et al. 2006) for atmospheric dynamics and physics, OPA (Madec et al. 1997) for ocean dynamics, LIM (Fichefet and Maqueda 1997; 1999) for sea ice dynamics and thermodynamics, and ORCHIDEE (Krinner et al. 2005) for the land surface. Sulphate aerosols concentrations are externally imposed and direct and indirect aerosol forcings are considered (Quaas et al. 2004, Dufresne et al. 2005). This model participates to the CMIP3 project, the multimodel ensembles climate projections used in the intergovernmental panel on climate change (IPCC) assessment report (IPCC-AR4).\n" description_attribution: http://icmc.ipsl.fr/index.php/icmc-models/icmc-ipsl-cm4 href: https://data.globalchange.gov/model/ipsl-cm4.yaml identifier: ipsl-cm4 name: Institut Pierre Simon Laplace Climate Model version 4 project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/IPSL-CM4.htm uri: /model/ipsl-cm4 version: ~ website: ~ - description: ~ description_attribution: ~ href: https://data.globalchange.gov/model/miroc3_2_hires.yaml identifier: miroc3_2_hires name: MIROC3.2 (Model for Interdisciplinary Research on Climate) project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/MIROC3.2_hires.htm uri: /model/miroc3_2_hires version: ~ website: ~ - description: ~ description_attribution: ~ href: https://data.globalchange.gov/model/miroc3_2_medres.yaml identifier: miroc3_2_medres name: MIROC3.2 (Model for Interdisciplinary Research on Climate) project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/MIROC3.2_medres.htm uri: /model/miroc3_2_medres version: ~ website: ~ - description: ~ description_attribution: ~ href: https://data.globalchange.gov/model/miroc5.yaml identifier: miroc5 name: MIROC5 (Model for Interdisciplinary Research On Climate) project_identifier: ~ reference_url: http://cmip.llnl.gov/cmip5/publications/model?exp=MIROC5 uri: /model/miroc5 version: ~ website: http://www.icesfoundation.org/Pages/ScienceItemDetails.aspx?siid=181 - description: "The new version of the global coupled atmosphere-ocean general circulation model (MRI-CGCM2), developed at the Meteorological Research Institute (MRI), is intended to enable examination of transient future climate changes associated with anthropogenic forcings such as the increase of greenhouse gases and sulfate aerosols. It is important for a climate model to be able to reproduce the present climate system realistically, including individual physical process components and interactions between them. For simulating the transient response of the climate system to specific influences, such as the IPCC scenario of an increase in greenhouse gases and aerosols, it is necessary for the model to simulate adequately not only the mean climate but also its variability.\n" description_attribution: http://www.mri-jma.go.jp/Dep/cl/cl4/publications/yukimoto_pap2001.pdf href: https://data.globalchange.gov/model/mri-cgcm2_3_2.yaml identifier: mri-cgcm2_3_2 name: Meteorological Research Institute Coupled Global Climate Model Version 2.3.2 project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/MRI-GCGM2.3.2.htm uri: /model/mri-cgcm2_3_2 version: ~ website: http://www.mri-jma.go.jp/Dep/cl/cl4/publications/yukimoto_pap2001.pdf - description: "This is a joint effort to develop a DOE-sponsored parallel climate model between Los Alamos National Laboratory (LANL), the Naval Postgraduate School (NPG), the US Army Corps of Engineers' Cold Regions Research and Engineering Lab (CRREL) and the National Center for Atmospheric Research (NCAR). We have coupled the NCAR Community Climate Model version 3, the LANL Parallel Ocean Program, and a sea ice model from the Naval Postgraduate School together in a massively parallel computer environment. This is Version 1 of the PCM (PCM1).\n" description_attribution: http://www.cgd.ucar.edu/pcm/ href: https://data.globalchange.gov/model/pcm.yaml identifier: pcm name: Parallel Climate Model project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/PCM.htm uri: /model/pcm version: ~ website: http://www.cgd.ucar.edu/pcm/ - description: |- HadCM3 is a coupled climate model that has been used extensively for climate prediction, detection and attribution, and other climate sensitivity studies. HadCM3 stands for the Hadley Centre Coupled Model version 3. It was developed in 1999 and was the first unified model climate configuration not to require flux adjustments (artificial adjustments applied to climate model simulations to prevent them drifting into unrealistic climate states). description_attribution: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm3 href: https://data.globalchange.gov/model/ukmo-hadcm3.yaml identifier: ukmo-hadcm3 name: 'United Kingdom Met Office, Hadley Centre, Climate Model Version 3' project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/HadCM3.htm uri: /model/ukmo-hadcm3 version: ~ website: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm3 - description: 'HadGEM1 is the first in a new generation of coupled climate models incorporating a non-hydrostatic, fully compressible, deep atmosphere formulation with a semi-implicit semi-Lagrangian time integration scheme.' description_attribution: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadgem1 href: https://data.globalchange.gov/model/ukmo-hadgem1.yaml identifier: ukmo-hadgem1 name: 'United Kingdom Met Office, Hadley Centre Global Environmental Model version 1' project_identifier: cmip3 reference_url: http://www-pcmdi.llnl.gov/ipcc/model_documentation/HadGEM1.htm uri: /model/ukmo-hadgem1 version: ~ website: http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadgem1